76 ST80 Masterview Operation and Setup
Check Tack
This pop-up is displayed if:
• A course change is made using autopilot keypad –1 or –10 keys
when you are already on a port tack,
• A course change is made using the autopilot keypad +1 or +10 keys
when you are already on a starboard tack.
D2081-1
CHECK
DIRECTION
Caution: Although this pop-up warns you that you already on a particular tack,
it will not stop a gybe.
Track and Waypoint Advance
A pop-up showing the next target waypoint number and bearing is
displayed in response to a request for this data from the autopilot.
D2084-1
WP001
235
This pop-up alternates with the following display.
D2083-1
PRESS TRACK
TO ACCEPT
To Next Page
Loading...
