AUTOHELM ST80 - Waypoint Advance; Deselecting a Route; Reversing the Direction of a Route; Deleting a Route

52 ST80 Masterview Operation and Setup
Waypoint Advance
When a route is being tracked, you can advance to the next waypoint
by selecting the ‘Route’ page and pressing for 1 second.
Deselecting a Route
A route can be deselected by highlighting route ‘00’ or an empty
route (identified by the letter ‘E’).
ROUTE SELECTROUTE SELECT
Deselecting a Route
ROUTE SELECT
DESELECT
Reversing the Direction of a Route
The direction of a route can be reversed so that you can make a
return journey.
To reverse the direction of a route:
1. Go to the ‘Route’ page and go to ‘Route Select’.
2. Select a route to be reversed using the Navigator up or down key.
3. Press (reverse route key) – the letter ‘R’ appears to the right
of the route name.
4. Press (exit key) to return to the main route page – the letter
‘R’ appears in the top right of the screen to tell you that the route
has been reversed.
Deleting a Route
1. Go to the ‘Route List’ page.
2. Highlight the route to be deleted and then press . The display
now states ‘DELETE ROUTE?’ To delete the route, press .
3. If you decide you don’t want to delete the route, press .
Editing an Active Route
If the highlighted route is active, the letter ‘A’ is displayed adjacent
to the route number.
If a target waypoint appears in the route contents list, the letter ‘T’ is
displayed to the right of the name.