ST80 Masterview Operation and Setup 85
Lap Reset Mode
• Press the key to reset the lap timer to “00:00” (the display
returns to running mode).
• Reset mode is entered if the key is pressed.
Split Race Time
This mode displays the timer value (top), the point of entry into lap
mode and the value when both timers were stopped.
D2287-1
Go to the next chapter or
press for 1 second to enter
illumination adjustment.
Next page or
press for 1 second to
display previous page.
masterview
Reset race time to 00:00.
Reset race lap timer to
00:00.
Returns to race standby
mode.
RACE TIME
01:20
:50
01:53
:58
.
.
Note: As well as resetting both the race timer and lap timers, the key
also returns the display to race standby mode.
To Next Page
Loading...
