116 ST80 Masterview Operation and Setup
3. Use the up and down keys to set wind angle (displayed above the
adjustment bar) to zero. As the wind angle is zeroed the actual offset
(port or starboard) is displayed below the adjustment bar.
4. Wind angle offset adjustment is now complete. Press EXIT to return
to the main wind angle offset page.
2.7 Heading
D2215-1a
Response
Swing
Compass
Offset Variation
Heading
Selection
PAGES
HEADING
CHAPTER
Heading Response
Heading response controls the rate at which heading information is
updated.
D2307-1a
Advance to the next chapter
or press for 1 second to
enter illumination adjustment.
Go to the Next page or
press for 1 second to return
to the previous page.
Display adjustment icons.
masterview
S
-8
F
SET- UP
HEADING
067
LOCAL RESPONSE
Response Adjustment
D2214-1a
Exit response adjustment.
Decrease response.
Increase response.
To Next Page
Loading...
