AUTOHELM ST80 - Auto Tack; Starboard Tack; Port Tack

ST80 Masterview Operation and Setup 75
• If the course change keys are used in auto mode, the most recent
autopilot locked heading is stored as the old heading (providing
course change keys have not been used within the last 20 seconds).
• If the autopilot is set to auto vane mode, operation of the course
change keys results in the current wind angle being stored as the old
autopilot wind datum prior to adjustment the current wind datum
(providing the course change keys have not been used within the last
20 seconds).
Auto Tack
Starboard Tack
The starboard tack pop-up is displayed if a course change is made
using autopilot keypad +1 or +10 keys.
D2079-1
TACKING
Port Tack
The port tack pop-up is displayed if a course change is made using
autopilot keypad –1 or –10 keys.
D2080-1
TACKING