102 ST80 Masterview Operation and Setup
2.3 Entry into User Setup
You can enter User Setup from any page by pressing and holding the
two left hand keys for 2 seconds.
D2190-1
Press and hold these keys
together for 2 seconds to
display the "Enter Setup"
page.
masterview
D2640-1
ENTER
Return to normal operation
without entering set-up
mode.
SET-UP
Enter set-up mode.
Note: Entry to “User Setup” has been prohibited if the display reads
“SET-UP OFF”. Contact your local dealer if this message is
displayed.
2.4 Speed
D2192-1
Boat
Speed
Response
VMG
Wind
Response
Boat
Speed
Units
Distance
Units
VMG
Trend
Boat
Speed
Display
Format
Speed
Trend
Indicators
PAGES
SPEED
CHAPTER
Distance
Format
Speed
Transducer
Calibration
To Next Page
Loading...
Need help?
General
