ST80 Masterview Operation and Setup
133
This feature is selected in User Setup by entering the vessel’s
operating latitude. Once selected, manual adjustments are not
required as the Rudder Gain is adjusted automatically.
D2661-1
Go to the Pilot Setup Exit
page.
Decrease value.
Increase value.
Advance to the next pilot
feature.
masterview
SET- UP
PILOT
AUTO ADAPT
NORTH
• Auto adapt can be set to: OFF, North or South.
Latitude
Latitude compensates for Northerly/Southerly heading errors.
D2662-1
Go to the Setup Exit page.
Decrease value.
Increase value.
Advance to the next pilot
feature.
masterview
SET- UP
PILOT
LATITUDE
3oN
• The default setting is 0° with a range of 0 to 80°.
To Next Page
Loading...
Need help?
General
