58 ST80 Masterview Operation and Setup
Selecting Lines
The default lines for this page are DTW, BTW and VMG.
Alternative lines can be selected as follows:
D2263-1
Go to the next chapter or
press for 1 second to enter
illumination adjustment.
Next page or press for 1
second to return to the
previous page.
masterview
SINGLE WP
0.0
DTW 20.2 NM
BTW 110o30' M
Highlight another line.
Change contents of
highlighted line. Press for 1
second to return to the
previous selection.
VMG 15.4 KTS
Note: The highlight bar disappears after 8 seconds of keypad inactivity.
Steering Page
Cross Track Error
• This page displays any deviation (if applicable) from a planned
route/track.
• A steering indicator shows the direction-to-steer to return to the
planned route.
D2264-1
Go to the next chapter or
press for 1 second to enter
illumination adjustment.
Next page or
press for 1 second to return
to the previous page.
masterview
XTE ERROR
Select cross track error
tramline.
NM
1.34
To Next Page
Loading...
Need help?
General
