BEAMEX MC4 - Support for Table Top Use; Memory; Display

Support for Table Top Use
MC4 User Guide 9
Generation/simulation capabilities of Temperature/Generate section:
• Low Voltage generation using either the Low Voltage
connectors or the internal reference junction,
• T/C simulation using either the internal reference junction
or the Low Voltage connectors,
• Current, Voltage, Frequency and Pulse generation and
• RTD and Resistance simulation.
Support for Table Top Use
The support gives you a good viewing angle when MC4 is placed on
a table top.
Memory
MC4 maintains data very much like personal computers. Data is
saved on a solid state memory that does not need any power to
maintain its state. Solid state memory is shock proof so the data is
not lost when the calibrator is transported.
Also: all available storage can be used for anything that requires it
(e.g. instrument data, calibration results etc.).
Display
MC4 has a backlit LCD display. The resolution of the display is
160 x 160 pixels.
The backlight is turned on or off by briefly pressing the power button.
Pressing the button for a longer time shuts down MC4. More of
backlight settings in part C of this manual.
To tune the contrast of the display:
• Press F1/ Contrast when either viewing the welcome
screen or the General Settings screen.
• Use the up and down arrow keys to change the
contrast.
The changed settings are automatically saved as default settings.