MC4 Firmware
16 MC4 User Guide
MC4 Firmware
MC4's firmware is saved in FLASH memory. Therefore it is relatively
easy to update the firmware whenever a new version with fresh
capabilities is released. See Firmware Update on page 32 for more
information on updating the firmware in your MC4.
General Description
The following chapters briefly describe each main function.
Startup Procedure
When starting MC4 the startup procedure ends up in a welcome
screen. From there it proceeds to Basic Mode and you are ready to
start using the calibrator.
A more comprehensive description of the Startup Procedure is in the
beginning of Part B of this manual.
Basic Mode and Higher Level Functions
In Basic Mode you can measure, generate and simulate signals. There
are two separately configurable windows available.
All main functions of Basic Mode are described in part B of this
manual.
Part C concentrates on higher level functions and additional
information.
Instrument Database and Instrument Calibration
Instrument database and instrument calibration related information is
available in Part D of this manual.
To Next Page
Loading...
