Batteries
MC4 User Guide 15
PC Communication with USB
The first time you connect MC4 to a computer (using the USB cable
delivered with MC4), Windows' Found New Hardware Wizard
initializes wanting to install a device driver.
The driver can be found at Beamex's web site
(http://www.beamex.com). Look for MC2/MC2-IS/MC4 downloads.
The driver is part of the software update package.
Notes.
The driver has been tested on Windows XP, Windows 2000,
Windows Vista and in Windows 7, 32 and 64 bit versions.
Windows 95, 98, NT4, ME operating systems are not supported.
See also possible additional information delivered with the driver.
This procedure is needed when connecting MC2-IS for the first time
to a particular USB port in a PC. After the driver is installed,
communication initializes automatically, if MC2-IS is connected to
the same USB port in a PC.
To Next Page
Loading...
