Safety Precautions and Warnings
MC4 User Guide 27
Safety Precautions and Warnings
MC4 calibrator is a precision calibration tool that should be used by
skilled people who have read and understood this User Guide.
Working with MC4 involves the usage of pressure and/or electrical
instruments. Be sure to know how to work with these instruments
and how to safely connect/disconnect pressure hoses as well as
electrical test leads clips, etc.
Use MC4 only if you are certain of that it can be used safely. Safe
use of MC4 is no longer possible if one or more of the following
cases are true:
• When the case of MC4 is evidently damaged
• When MC4 is not functioning as expected
• After prolonged storage in unfavorable conditions
• After serious damage during transport
Sometimes it is necessary to use a portable radio transceiver while
working with the calibrator. To prevent calibration errors caused by
the radio frequency interference, keep the radio far (at least 1 meter)
from the calibrator and the circuit under calibration while sending.
To Next Page
Loading...
