BEAMEX MC4 - Starting MC4; Startup Procedure

Starting MC4
36 MC4 User Guide
Starting MC4
Startup Procedure
When MC4 is started, a startup picture appears. After a self test, a
welcome screen appears displaying some basic information of the
calibrator at hand.
C o n t r a s t C o n t i n u e
1 5 . 0 8 . 2 0 0 7 0 7 : 4 2 : 2 2
W E L C O M E
M o d e l
S N :
V e r s i o n
M C 4
2 0 4 8 2
3 . 0 2
I l l u m i n a t i o n s I n c . , W o r k s h o p 4
C a l i b r a t i o n d u e i n 2 9 d a y s
W a i t
If you want to view the calibrator information for a longer period,
press the F2/ Wait Function Key. Then the calibrator information is
visible until you press the F3/ Continue Function Key.
The lowermost row displays the days until (or since) MC4's due date
for recalibration. If the calibration is overdue, or in the near future,
MC4 stops at the welcome screen to remind you of the need for
recalibration. Otherwise it continues to Basic Mode after a while (or
when you press the F3/ Continue Function Key).