BEAMEX MC4 - Page 211

Appendix 1, Technical Data
MC4 User Guide 199
Feature Specification
Temperature coefficient <±0.001 % Rdg/°C outside 1535°C (59  95 °F)
Maximum overpressure Barometric Option: 1200 mbar abs (35.4 inHg abs)
Others: 2 × Range
Pressure port Barometric option:
M5 (10/32") female
NPM160:
G 1/8” female (parallel )
All others:
G1/8” (ISO228/1) female. A conical 1/8” BSP male with
60° internal cone adapter included for Beamex hose set.
Wetted parts AISI316 stainless steel, Nitrile rubber.
Pressure media Barometric option:
Dry clean air or other clean, inert, non-toxic,
non-corrosive gases
All others:
Clean, inert, non-toxic, non-corrosive gases or liquids
Use of pressure media classified as dangerous is prohibited.
Supported pressure units Pa, hPa, kPa, MPa, mbar, bar, lbf/ft2, psi, osi, gf/cm2, kgf/cm2,
kgf/m2, kp/cm2, at, mmH2O, cmH2O, mH2O, iwc, ftH2O, mmHg,
cmHg, mHg, inHg, mmHg(0°C), inHg(0°C), mmH2O(4°C),
inH2O(4°C), ftH2O(4°C), inH2O(60°F), mmH2O(68°F),
inH2O(68°F), ftH2O(68°F), torr, atm,
+ four (4) user configurable units
Operating temperature -10+50°C (14122 °F)
Storage temperature -20+60°C (-4140 °F)
Humidity range 080 % R.H. non-condensing
Display update rate 2.5 / second