Bosch Rexroth Tightening System 350 - Page 203

3 608 878 300 Tightening Technology | Bosch Rexroth AG 203/641
System 350 | 3 608 878 300/2019-03
6.1.3.3 ID code source used
Table 6–3: ID code source used for single-channel operation
1
ID code source set
in BS350 (SE
data)
ID code source
set in BS350
(tightening cell
data)
ID code availability ID code used in
the results output
No ID code No ID code ID code source on the KE has no effect. –
Cycle counter –
PLC1/PLC2 –
FTP/Ethernet –
Field bus –
Scanner –
IL –
Scanner within the
hand-held
nutrunner
–
Cycle counter No ID code ID code source on the KE has no effect. SE cycle counter
Cycle counter SE cycle counter
PLC1/PLC2 SE cycle counter
FTP/Ethernet SE cycle counter
Field bus SE cycle counter
Scanner SE cycle counter
IL SE cycle counter
Scanner within the
hand-held
nutrunner
SE cycle counter
Scanner No ID code ID code source on the KE
has no effect.
Yes Read-in (bar) code
Cycle counter ID code was deleted –
PLC1/PLC2 –
FTP/Ethernet Source selected but not
available
–
Field bus –
Scanner –
IL –
Scanner within the
hand-held
nutrunner
–