Bosch Rexroth Tightening System 350 - Page 204

204/641 Bosch Rexroth AG | Tightening Technology 3 608 878 300
System 350 | 3 608 878 300/2019-03
ID code KE No ID code – –
Cycle counter – SE cycle counter
PLC1/PLC2 Yes From data element
ID code was deleted –
Source selected but not available –
FTP/Ethernet File available ID code from file
No file available (ID code deleted) –
Source selected but not available –
Field bus Not configured for ID code transfer –
Configured for ID code transfer and active Type A interface
module
Configured for ID code transfer and inactive –
Source selected but not available –
Scanner Yes ID code from
scanner
ID code was deleted –
Source selected but not available –
IL Yes ID code that was
transferred from the
integrated logic (IL)
ID code was deleted –
Source selected but not available –
Scanner within the
hand-held
nutrunner
Yes ID code from
scanner with hand-
held nutrunner
ID code was deleted –
Source selected but not available –
Open Protocol Yes ID code of Open
Protocol
ID code was deleted –
Source selected but not available –
1 This table also applies to compact systems that are operated as slave of a modular system (CS351x-D NK, from
version V2.200 of the Rexroth Tightening System 350, see„CS351 compact system“ from page 39).
Table 6–4: ID code source used for application operation
ID code source
set in BS350 (SE
data)
ID code source set
in BS350
(tightening cell
data)
ID code availability ID code used in
the results output
Not relevant No ID code – –
Not relevant Cycle counter – KE cycle counter
Not relevant PLC1/PLC2 Yes From data element
ID code was deleted –
Source selected but not available –
Not relevant FTP/Ethernet File available ID code from file
No file available (ID code deleted) –
Source selected but not available –
Not relevant Field bus Not configured for ID code transfer –
Configured for ID code transfer and active Type A interface
module
Configured for ID code transfer and inactive –
Source selected but not available –
Table 6–3: ID code source used for single-channel operation
1
ID code source set
in BS350 (SE
data)
ID code source
set in BS350
(tightening cell
data)
ID code availability ID code used in
the results output