Bosch Rexroth Tightening System 350 - Page 318

318/641 Bosch Rexroth AG | Tightening Technology 3 608 878 300
System 350 | 3 608 878 300/2019-03
2. Double click the line CS to view the interfaces.
Fig. 6–64: Configuration of the X3C1 interface at the compact system
3. Double click the line X3C1 to open the associated parameters dialog.
To configure the serial interface of the KE350 communication unit:
1. In the BS350 operating system, click System  KE configuration.
This function opens the KE configuration currently on the controller.
Fig. 6–65: Configuration of the X3C1 interface at the communication unit