Bosch Rexroth Tightening System 350 - Page 350

350/641 Bosch Rexroth AG | Tightening Technology 3 608 878 300
System 350 | 3 608 878 300/2019-03
Direction of rotation – 1: Clockwise (CW)
– 2: Counterclockwise (CCW)
The value consists of one ASCII character.
ID 03
2
Value range 0–9
Presetting -
Example:
Direction of rotation Clockwise (CW)
Value 1
1
Placeholder value The value consists of two ASCII characters.
ID 04
2
Fixed value 00
2
Minimum torque The minimum torque limit is multiplied by 100, rounded, and sent as a
whole number.
The value consists of six ASCII characters.
ID 05
2
Value range 000000 – 999999
Presetting -
Example:
Minimum torque 234,00
Value 023400
6
Maximum torque The maximum torque limit is multiplied by 100 and then sent as a whole
number (rounded to two decimals).
The value consists of six ASCII characters.
ID 06
2
Value range 000000 – 999999
Presetting -
Example:
Maximum torque 321,11
Value 032111
6
Target torque The target torque is multiplied by 100 and then sent as a whole number
(rounded to two decimals).
The value consists of six ASCII characters.
ID 07
2
Value range 000000 – 999999
Presetting -
Example:
Target torque 250,00
Value 025000
6
Minimum angle The value consists of five ASCII characters.
ID 08
2
Value range 00000 – 99999
Presetting -
Example:
Minimum angle 30
Value 00030
5
Table 6–82: MID 0013 revision 001
Parameter Comments Bytes