Bosch Rexroth Tightening System 350 - Page 373

3 608 878 300 Tightening Technology | Bosch Rexroth AG 373/641
System 350 | 3 608 878 300/2019-03
Torque status – 0: Low
–1: OK
–2: High
The value consists of one ASCII character.
ID 10
2
Value range 0–2
Presetting -
Example:
Torque status High
Value 2
1
Angle status – 0: Low
–1: OK
–2: High
The value consists of one ASCII character.
ID 11
2
Value range 0–2
Presetting -
Example:
Angle status OK
Value 1
1
Minimum torque limit (T-) The value is multiplied by 100 and transferred as a whole number
(rounded to 2 decimals).
The value consists of six ASCII characters.
ID 12
2
Value range 000000 – 999999
Presetting -
Example:
Minimum torque
limit (T-)
12,13
Value 001213
6
Maximum torque limit (T+) The value is multiplied by 100 and transferred as a whole number
(rounded to 2 decimals).
The value consists of six ASCII characters.
ID 13
2
Value range 000000 – 999999
Presetting -
Example:
Maximum torque
limit (T+)
20,00
Value 002000
6
Target torque (TP) The value is multiplied by 100 and transferred as a whole number
(rounded to 2 decimals).
The value consists of six ASCII characters.
ID 14
2
Value range 000000 – 999999
Presetting -
Example:
Target torque
(TP)
23,00
Value 002300
6
Table 6–98: MID 0061 revision 001
Parameter Comments Bytes