Bosch Rexroth Tightening System 350 - Page 374

374/641 Bosch Rexroth AG | Tightening Technology 3 608 878 300
System 350 | 3 608 878 300/2019-03
Torque (T) The value is multiplied by 100 and transferred as a whole number
(rounded to 2 decimals).
The value consists of six ASCII characters.
ID 15
2
Value range 000000 – 999999
Presetting -
Example:
Torque (T) 20,50
Value 002050
6
Minimum angle (A-) The value is output in degrees.
The value consists of five ASCII characters.
ID 16
2
Value range 00000 – 99999
Presetting -
Example:
Minimum
angle (A-)
5
Value 00005
5
Maximum angle (A+) The value is output in degrees.
The value consists of five ASCII characters.
ID 17
2
Value range 00000 – 99999
Presetting -
Example:
Maximum
angle (A+)
450
Value 00450
5
Target angle (AP) The value is output in degrees.
The value consists of five ASCII characters.
ID 18
2
Value range 00000 – 99999
Presetting -
Example:
Target angle (AP) 90
Value 00090
5
Angle (A) The value is output in degrees.
The value consists of five ASCII characters.
ID 19
2
Value range 00000 – 99999
Presetting -
Example:
Angle (A) 60
Value 00060
5
Time stamp Date and time of the tightening.
The value consists of 19 ASCII characters in the format
YYYY-MM-DD:HH:MM:SS.
ID 20
2
Value range 0 – 9, "-" and ":"
Presetting -
Example:
Time stamp 1/12/2009:2:43:57 PM
Value 1/12/2009:2:43:57 PM
19
Table 6–98: MID 0061 revision 001
Parameter Comments Bytes