386/641 Bosch Rexroth AG | Tightening Technology 3 608 878 300
System 350 | 3 608 878 300/2019-03
MID 0061 revision 999
Tightening error code customer Contains the error code that occurred at the customer during the
tightening.
The value consists of four ASCII characters (always: "0000").
ID 53
2
Value range 0000
Presetting 0000
Example:
ID code part 2 0000
Value 0000
4
Data length revision 005 (= data length revision 005 + data length revision 004)
486
Table 6–103: MID 0061 revision 999
Parameter Comments Bytes
ID code Contains the first 25 bytes of the ID code.
The value consists of 25 ASCII characters.
ID -
Value range 0x20 – 0x7F
Presetting -
Example:
ID code 123456
Value 123456
25
Job number Start as a single channel:
– Outside of the job sequence: Number of the selected OK/NOK
counter
– Inside of the job sequence: Number of the job
Start of the channel from the application:
– Outside the KE job sequence: 0
– Inside the KE job sequence: Number of the job
The job number consists of two ASCII characters.
ID -
Value range 01–99
Presetting -
Example:
Job number 2
Value 02
2
Tightening program number Number of the current tightening program.
The value consists of three ASCII characters.
ID -
Value range 000–999
Presetting -
Example:
Tightening
program number
5
Value 005
3
Table 6–102: MID 0061 revision 005
Parameter Comments Bytes
To Next Page
Loading...
