404/641 Bosch Rexroth AG | Tightening Technology 3 608 878 300
System 350 | 3 608 878 300/2019-03
MID 0077 System error status acknowledgement
MID 0078 Acknowledge system error in tightening controller
6.7.7.11 Time messages
MID 0080 Time on the tightening controller request
MID 0081 Upload time
Time Date and time when the error occurred.
The value consists of 19 ASCII characters in the format
YYYY-MM-DD:HH:MM:SS.
ID 05
2
Value range 0 – 9, "-" and ":"
Presetting -
Example:
Time 1/12/2009:11:54:29 AM
Value 1/12/2009:11:54:29 AM
19
Data length revision 001
36
Table 6–109: MID 0076 revision 001
Parameter Comments Bytes
Sent by: superordinate computer
Acknowledgement for MID 0076
Note: -
Revision: 001 (supported by Rexroth OP and Rexroth OP-Ford and Rexroth OP-BMW)
Data field: is empty, 0 bytes
Possible response: none
Sent by: superordinate computer
Class 3 errors can be acknowledged by the superior computer with this message.
Note: -
Revision: 001 (supported by Rexroth OP)
Data field: is empty, 0 bytes
Possible responses MID Error no. Comment
Command accepted 0005 –
Command error 0004 58
01
No system error available
Invalid data
Sent by: superordinate computer
Time on the tightening controller request
Note: -
Revision: 001 (supported by Rexroth OP and Rexroth OP-Ford and Rexroth OP-BMW)
Data field: is empty, 0 bytes
Possible response MID Error no. Comment
Upload time 0081 –
Sent by: Tightening controller
Upload time
Note: -
Revision:
001 (supported by Rexroth OP and Rexroth OP-Ford and Rexroth OP-BMW)
Data field: Date and time YYYY-MM-DD:HH:MM:SS, 19 bytes
Possible response: none
To Next Page
Loading...
