Bosch Rexroth Tightening System 350 - Page 440

440/641 Bosch Rexroth AG | Tightening Technology 3 608 878 300
System 350 | 3 608 878 300/2019-03
Step result parameters
All information on tightening steps are entered into this table.
Tightening function parameters
Every tightening step may contain tightening function parameters (tightening functions) (target functions,
monitoring functions, ...). These are entered in a table.
Table 6–129: Step result parameters and their meaning
Parameter
Meaning
step type Type of step (standard / expert)
row Tightening step row number
column Tightening step column number
name Step name
category Tightening step category
docu buffer Display whether the results of the tightening step are written to
a docu buffer (for data output via field bus or data protocol).
result Step result OK/NOK
last cmd Last tightening program command of the step
speed Set speed
quality code Quality code
graph value torque Graph value Torque
graph value angle Graph value Angle
gradient threshold Set and actual value of gradient torque threshold
angle threshold Set and actual value of angle counting torque threshold
Table 6–130: Tightening function parameters and their meaning
Parameter
Meaning
TF Angle Target function Angle
TF Torque Target function Torque
TF Time Target function Time
TF Gradient Target function Gradient
TF Input Target function Input
TF Upper Torque Target function Upper torque
TF Lower Torque Target function Lower torque
TF Relative Torque, upper Target function Upper relative torque
TF Relative Torque, lower Target function Lower relative torque
TF Yield Point Target function Yield point
TF GoRef Target function GO Ref
TF GoOpen Target function GO Open
MF TorqueMax Monitoring function Torque max
MFs TorqueMax Monitoring function Torque max, switching
MF TorqueMin Monitoring function Torque min
MFs TorqueMin Monitoring function Torque min, switching
MF AngleMin Monitoring function Angle min
MF AngleMax Monitoring function Angle max
MFs AngleMax Monitoring function Angle max, switching
MF GradientMin Monitoring function Gradient min
MFs GradientMin Monitoring function Gradient min, switching
MF GradientMax Monitoring function Gradient max
MFs GradientMax Monitoring function Gradient max, switching
MFs TimeMax Monitoring function Time, switching
MFs RedundancyAngle Monitoring function Redundancy angle
MFs RedundancyTorque Monitoring function redundancy torque
MF RelativeTorqueMin Monitoring function Torque relative min
MFs RelativeTorqueMin Monitoring function Torque relative min, switching