3 608 878 300 Tightening Technology | Bosch Rexroth AG 465/641
System 350 | 3 608 878 300/2019-03
6.10.2.2 "Select ID-code filter" dialog
Via the ID-code settings button in the configuration window, open the Select ID-code filter dialog with
the index cards ID-code from application results and ID-code from channel results. In these index
cards, the configuration for the ID-code can be defined.
• ID-code from application results
For the configuration of the ID code from the application results, the results from application
operation as well as the results from single channel operation can be configured.
Comments can be entered in the last column.
• ID-code from channel results
For the configuration of the ID code from the channel result, only the results from single channel
operation can be configured.
Comments can be entered in the last column.
By clicking on the respective field, the following configuration for the individual data fields is defined:
In the right list, the selected ID code data and ID code masks are displayed.
Mask / data from application results
Mask / data from channel results
No data
To Next Page
Loading...
