544/641 Bosch Rexroth AG | Tightening Technology 3 608 878 300
System 350 | 3 608 878 300/2019-03
File Save as ...
Use File Save as ... to save the open file to the data carrier (e.g. hard disk). Amongst others, these files
include:
• Tightening program
• Tightening application
• Tightening jobs
• CS, SE, or KE configuration
• PLC assignment table for the SE/CS or KE
•Graph
File Save tightening cell
The contents of a tightening cell are saved in several individual files using File Save tightening cell.
These files can be opened separately using BS350 (File Open ...) and, if needed, be sent back
individually to the controller.
In the dialog for saving the content of a tightening cell, the following information can be entered:
• Directory path
• Tightening channel selection (only one channel is available with the compact system)
• Selection of the data to be saved
Select Save to initiate the saving procedure. The saved data is stored in the selected directory in a folder
for each SE with the identification "Ch x.y channel name" or in a folder for the KE with the identification
"KE". The file name extension is based on Table 7–10.
Exit the dialog using Close.
File name extensions
The following table gives an overview of the file name extensions when they are saved.
Table 7–10: Files with file name extensions
Files File name extension
Tightening program
*.prg
All tightening programs
*.prx
Tightening application
*.fop
All tightening applications
*.fox
Tightening job CS
*.job
All tightening jobs CS
*.jbx
Tightening job KE
*.kjb
All tightening jobs KE
*.kjx
Tightening job SE
*.sjb
All tightening jobs SE
*.sjx
Graphs *.crv
Tightening channel configuration
*.scg
KE configuration
*.kcg
PLC assignment table SE / CS
*.sio
PLC assignment table KE
*.kio
PLC assignment table IL export data *.exp
Quality code
*.qtb
HMI configuration
*.sdc
CS field bus data
*.sdf
KE field bus data
*.kdf
Graph memory configuration
*.scv
Results storage configuration
*.sre
Results storage display *.sdt
To Next Page
Loading...
