42 Sync Control System
(5) Power Connector - 120VAC-240VAC input power connector.
(6) Digital Audio Inputs - Input connections for either toslink or coax digital audio signal
originating from the video source.
(7) Analog Audio Inputs - Input connection for analog L/R audio signal originating from the
video source.
(8) Power - Indicates whether the unit is powered “on”.
(9) Input Switch - Switches between Component Video and VGA inputs.
(10) Active Video Source Indicator - Indicates which video input is currently selected.
(11) Broadcast Status Indicator - Indicates if the video source is being sent to coax output.
(12) Active Audio Source Indicator - Indicates which audio input is currently selected.
(13) Error Indicator - Indicates that system is booting or there is a system error.
To Next Page
Loading...
