Brunswick Sync - No Scoring on Both Lanes (Non-GS Pinsetter)

Troubleshooting 11
No Scoring on Both Lanes (Non-GS Pinsetter)
Check the ball
detector
alignment.
Does the Ball
Detector indicate
when the ball detect
beam is blocked?
NO
Check the ball
detector For
adjacent lanes
Replace ball
detector
Start Here
Check the
Sweep/Rake
switches for
proper operation
Check for
proper operation
of the pinsetter
Reset the
Distribution board
(Press white button)
Check the cabling
from the Pinsetter
to the Distribution
board
YES
Replace the
Peripheral
Controller