Brunswick Sync - Peripheral Controllers (Distribution Boards)

Sync Control System 51
Peripheral Controllers (Distribution Boards)
The following procedure allows the user to reboot individual or a group of Peripheral Controllers.
1. In the Sync Desk program, navigate to the Lane Sales view panel.
2. Select the lane or lane range for the Peripheral Controller(s) (Distribution Board(s)) that you
want to reboot.
3. Select More, then select Pinsetter Control.
4. Select Reboot Distribution Board.
(1)
MORE
(2)
PINSETTER
CONTROL
(3)
SELECT
REBOOT
DISTRIBUTION
BOARD
Rebooting Peripheral Controllers
(1) MORE (2) PINSETTER CONTROL (3) SELECT REBOOT
DISTRIBUTION BOARD