Brunswick Sync - No Scoring on One Lane (Non-GS Pinsetters)

10 Troubleshooting
No Scoring on One Lane (Non-GS Pinsetters)
Start Here
Check the
Sweep/Rake
switches for
proper operation
Check for
proper operation
of the pinsetter
Check the cabling
from the Pinsetter
to the Distribution
board
Check the ball
detector
alignment.
Does the Ball
Detector indicate
when the ball detect
beam is blocked?
NO YES
Check the ball
detector For
adjacent lanes
Replace ball
detector
Replace the
Peripheral
Controller
Reset the
Distribution board
(Press white button)