Sync Scorer Components 45
(1) Device List - A list of all devices on the Sync network.
(2) IP Address- The network IP address assigned to the selected device.
(3) Reboot - Master system reboot. This selection causes all devices on the network to reboot.
(4) Broadcast - Sends the conguration information to all devices on the network.
(5) Congure - Sends the conguration information to the selected device.
(6) Logs - Used by technical support to gather log les if logging has been enabeled. Logging
must be turned in the ofce program on the Home tab, System Analysis screen.
(7) Name - The name assigned to the devices within the system.
(8) Identify - Forces the selected device to display its conguration settings on its display monitor.
(9) DVR - Used by technical support to enable recording of activity for a device for a specied
period of time.
To Next Page
Loading...
