Restart the machine.
Turn OFF the machine, wait for at least 10 seconds, and turn it back ON.
LINKS
Entering Sleep Mode
[Notify]
Select the check box to notify imageWARE of the power status of the machine. When [Notify] is selected, you can
expect the machine to avoid unnecessary communication during sleep mode and reduce the total power
consumption.
[Port Number]
Change the port number for this function according to the network environment.
[Number of Routers to Traverse]
Specify how many routers the notification packets can pass. Enter a number from 0 to 254.
[Notification Interval]
Specify how often the machine notifies imageWARE of its power status. Enter a number in seconds from 60 to
65535.
3
Click [OK].
5
㻟㻥㻡㻌㻛㻌㻢㻣㻢
To Next Page
Loading...
