17 Levels
Low
17 Levels
NOTE
The settings specified for <Toner Density (Fine Adjust)> are disabled when <Toner Save> is enabled.
Toner Save
Select whether to reduce toner consumption.
Off
On
IMPORTANT
When this setting is enabled, fine lines and portions with lighter print density may become blurred.
Gradation
Select the data processing method to reproduce gradations. Select <High 2> if you want to print in better quality than when selecting
<High 1>.
High 1
High 2
Special Smoothing Mode
Select a smoothing mode to print documents with a smooth finish. If you are not satisfied with the printing results of <Mode 1>
(default), you can try printing again by using another.
Mode 1
Mode 2
<Printer Settings> <Print Quality> <Density> <Toner Density (Fine Adjust)>
Select the toner color Select <High>, <Medium>, or <Low> Specify the toner density Press
<Apply> repeatedly until <Settings applied.> is displayed.
<Printer Settings> <Print Quality> <Toner Save> Select <Off> or <On>
<Printer Settings> <Print Quality> <Gradation> Select <High 1> or <High 2>
㻡㻝㻟㻌㻛㻌㻢㻣㻢
To Next Page
Loading...
