You
can
set the
machine or
a computer
(printer driver)
to
perform
color
matching.
If
<Printer> is
selected,
the
machine perform
scolor matching, and if <Host> is selected, the computer or printer driver performs it.
Printer
Host
CMS (Matching)/Gamma
Select the processing method for print data. You can select to perform color matching or to perform gamma correction. You can
specify the setting separately for text, graphics, and images.
Text
Gamma
CMS
Graphics
Gamma
CMS
Image
Gamma
CMS
Gamma Correction
Set the gamma correction value to match the brightness of the printouts to that of the original data. If the printout looks darker or
brighter than original, change the gamma correction value. As the value gets bigger, the printout becomes darker. You can apply the
setting separately for text, graphics, and images.
Text
1.0
1.4
1.8
2.2
Graphics
1.0
1.4
1.8
2.2
Image
1.0
1.4
1.8
2.2
NOTE
This setting is enabled only when <Gamma> is selected in <CMS (Matching)/Gamma>.
<Printer
Settings>
<PCL> <CMS
(Matching)
Selection>
Select <Printer> or
<Host>
<Printer Settings> <PCL> <CMS (Matching)/Gamma> Select <Text>,
<Graphics>, or <Image>
Select <Gamma> or <CMS>
㻡㻞㻢㻌㻛㻌㻢㻣㻢
To Next Page
Loading...
