CI Systems ControlMaster SR-800R - Getinputstatus; Outputenable

CI Systems SR-800R
6.2.17 GETINPUTSTATUS
 Summary: This command is used to get the current status of the selected Input
IO.
G E T I N P U T S T A T U S
Space
InputChannel
EOM
 Input Operand: InputChannel - There are 2 input digital IO channels in the
system. Valid values are either 1 or 2.
If no InputChannel number is provided then the command will default to
InputChannel 1.
 Return Values:
• 0 = Low
• 1 = High
6.2.18 OUTPUTENABLE
 Summary: This command is used to enable the IO Output Driver circuitry. This
command must precede any activity that uses the IO Output Port. See the related
SETOUTPUT t command hat is used to control the state of the output.
 Reference Command: SETOUTPUT
O U T P U T E N A B L E
Space
State
EOM
 Input Operand: State - State can be either 0 for OFF (Disabled) or 1 for ON
(Enabled)
 Return Values: None
605-7040 Operation Manual
Rev D 6-19
June 2013
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com