CI Systems ControlMaster SR-800R - Figure 7-5: Sensor Port Cleaning (Typical)

CI Systems SR-800R
6. Clean the Sensor port using the plastic straw that has been supplied:
a. Insert the plastic straw into the Sensor port.
b. Rotate the plastic straw several times in the Sensor port.
c. Remove the plastic straw from the Sensor port.
Figure 7-5: Sensor Port Cleaning (typical)
605-7040 Operation Manual
Rev D 7-5
June 2013
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com