CI Systems ControlMaster SR-800R - Figure 3-45: Re-Store Factory Defaults

CI Systems SR-800R
3.2.3.6.4 Re-Store Factory
The Re-Store Factory window allows you to set the initial factory default parameters
of the SR-800R Controller.
1. From the Options window, press
. The following window opens:
Figure 3-45: Re-Store Factory Defaults
2. Press to continue. The following opens:
3. To confirm and restore the factory-defaults press .
To cancel, press .
605-7040 Operation Manual
Rev D 3-43
June 2013
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com