CI Systems ControlMaster SR-800R - Figure 3-12: Selecting a Preset from the Preset Menu

CI Systems SR-800R
To select another preset (beyond the first four):
c. From the Main Window press one of the Preset buttons (P1 - P4) twice in
succession. The following window opens:
Figure 3-12: Selecting a Preset from the Preset Menu
d. Use the Up / Down buttons to review/select another Preset.
e. Press .
- The Main Window re-opens.
- The double-pressed P button is re-programmed with the new Preset.
- The ∆T field continuously displays the temperature of the Blackbody
Emitter.
- The Tt field continuously displays the target temperature.
- The TARGET field is updated with the preset and the target is selected on
the Target Wheel.
- The P button blinks until the Emitter temperature reaches the requested
temperature in the DT SET field.
You have set the temperature of the Blackbody Emitter, using the Differential Mode,
and selected a target for use during tests.
605-7040 Operation Manual
Rev D 3-12
June 2013
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com