CI Systems ControlMaster SR-800R - Figure 3-32: Target Setup; Figure 3-33: Target Setup - Type Pull-Down Menu

CI Systems SR-800R
3.2.3.6.1.2 Target Setup
1. Press
. The following Target Setup window opens:
Figure 3-32: Target Setup
2. To Change/Update the Type of an Existing Target:
a. Select a target from the list (you may browse the list by using the Up / Down
buttons).
b. From the Type pull-down menu select a new target type.
Figure 3-33: Target Setup - Type Pull-Down Menu
c. Press , and confirm the modification to the target setup.
605-7040 Operation Manual
Rev D 3-30
June 2013
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com