CI Systems ControlMaster SR-800R - GETSYSTEMINFO

CI Systems SR-800R
6.2.32 GETSYSTEMINFO
 Summary: Use this command to retrieve general system information. The
command returns the system parameters depending on the input operand request
value. Up to 7 different System Parameters can be returned.
G E T S Y S T E M I N F O Space nInfoRequest
EOM
 Input Operand: nInfoRequest.
 Return Values:
• For nInfoRequest == 1 - String - Controller Model.
• For nInfoRequest == 2 - String- Controller SN (may be alphanumeric).
• For nInfoRequest == 3 - String - Head Model.
• For nInfoRequest == 4 - String - Head SN.
• For nInfoRequest == 5 - String - Software Version.
• For nInfoRequest == 6 - String - Application Name.
• For nInfoRequest == 7 - String - Computer Name.
6.2.33 GETABSOLUTESETPOINT
 Summary: Use this command to return the current absolute temperature set point.
G E T A B S O L U T E S E T P O I N T
EOM
 Input Operand: None
 Return Values: The current absolute temperature set point with 3-digit resolution
605-7040 Operation Manual
Rev D 6-26
June 2013
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com