CI Systems ControlMaster SR-800R - Figure 3-51: Changing the Controller Name (2 of 3); Figure 3-52: Changing the Controller Name (3 of 3)

CI Systems SR-800R
b. Using the Keypad enter the new Controller Name and press
(CustomerName in this example). The following dialog-box opens:
Figure 3-51: Changing the Controller Name (2 of 3)
c. Press to approve your changes. The About window re-opens with the
new updated Controller Name:
Figure 3-52: Changing the Controller Name (3 of 3)
3. To close and return to the last opened window (the Menu Window) press .
4. To close and return to the Main window press .
605-7040 Operation Manual
Rev D 3-48
June 2013
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com