CI Systems ControlMaster SR-800R - SETACTIVEAXIS

CI Systems SR-800R
6.2.6 SETACTIVEAXIS
 Summary: This command sets the desired axis to be active for Target/Axis
operations. There can be only 1 axis active at a time. For systems that have more
than 1 axis, such as, a Target Wheel and a Filter Wheel, or Source Stage, use the
SetActiveAxis to select the desired wheels.
 Notes:
• The system stores this value and will power-up with the last active axis set.
• There is an alternate representation of this command, which can be used.
• You can query the system with the GetActiveAxis command to retrieve the
current active axis.
 Reference Command: GetActiveAxis, SetTarget
S E T A C T I V E A X I S
Space
AxisNumber
EOM
 Alternate Representation:
S E T A C T I V E A X I S
Space
AxisNumberID
EOM
 Input Operand: AxisNumber - this is a value between 1 and 4.
 Alternate Representation: AxisNumberID - this is a string value between 'Axis1'
and 'Axis4'.
 Return Values: None
 Note: Once the selected axis is set, use the SetTarget command to move the
wheel/stage to the desired location.
605-7040 Operation Manual
Rev D 6-12
June 2013
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com