CI Systems ControlMaster SR-800R - I;O Connector Pinout; RS232 Connector Pinout; Table 2-3: I;O Connector Pinout; Table 2-4: RS232 Connector Pinout

CI Systems SR-800R
2.4.3 I/O Connector Pinout
Table 2-3 lists the I/O Connector Pinout:
Table 2-3: I/O Connector Pinout
Pin #
Signal
Name
Function
Voltage
(V)
Current
(mA)
1 OUT1 Output Drive 24 ±1 V 100 (Max.)
2 OUT3 Output Drive 24 ±1 V 100 (Max.)
3 GND Ground ---- ----
4 IN1 Input Signal
0-24 V
Threshold = 2.5 V
High Impedance
5 IN2 Input Signal
0-24V
Threshold = 2.5V
High Impedance
6 OUT2 Output Drive 24±1 V 100 (Max.)
7 OUT4 Output Drive 24±1 V 100 (Max.)
8 OUT5 Output Drive 24±1 V 100 (Max.)
9 GND Ground ---- ----
2.4.4 RS232 Connector Pinout
Table 2-4 lists the RS232 Connector Pinout:
Table 2-4: RS232 Connector Pinout
Pin
#
Signal
Name
Function Max Voltage
(V)
Max Current
(mA)
1 DCD Data Carrier Detect ± 25 ± 2
2 RXD Received Data ± 25 ± 15
3 TXD Transmitted Data ± 7.5 ± 2
4 DTR Data Terminal Ready ± 7.5 ± 15
5 GND Ground ---- ----
6 DSR Data Set Ready ± 25 ± 2
7 RTS Request To Send ± 7.5 ± 15
8 CTS Clear To Send ± 25 ± 2
9 RING Ring Indicator ± 25 ± 2
605-7040 Operation Manual
Rev D 2-9
June 2013
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com