CI Systems SR-800R
Length (meters)
# Name
Standard Max
From To Function
5. GPIB
4m (single
load)
2m (x5
loads)
SR-800R
Host
Computer
Standard IEEE-488 GPIB
communication port used when the
SR-800R Controller operates under
the control of a host computer, or
connected the system computer.
6. LAN 4m 15m SR-800R
Host
Computer
Standard LAN Ethernet
communication port (RJ45
connector) used when the SR-800R
Controller operates under the
control of a host computer, either
directly or via the computer
network.
7. HEAD 4m 20m SR-800R Blackbody
A D-type 25-pin female connector
- the SR-800R Controller-to-
Blackbody connection used to
power the head and communicate
(digitally) with the temperature
sensor card, located inside the
Blackbody.
8. AXES 1/2 4m 20m SR-800R
Two
Stepper-
motors
A D-type 25-pin male connector -
used to control up to two step-
motor devices (such as Target-
Wheels and Stage).
9. AXES 3/4 4m 20m SR-800R
Two
Stepper-
motors
A D-type 25-pin male connector -
used to control up to two step-
motor devices (such as Target-
Wheels and Stage).
605-7040 Operation Manual
Rev D 2-8
June 2013
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...