CI Systems SR-800R
5. Click
. Within a few seconds the following opens:
Figure 7-12: Emitter Sensor and/or Target Sensor Selection
6. Select the Emitter Sensor S/N and/or the Target Sensor S/N from the dropdown
lists (the S/Ns are found in the supplied Removable Sensor Kit). Examples of the
lists:
Upon selection, the becomes active.
605-7040 Operation Manual
Rev D 7-19
June 2013
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...