CI Systems ControlMaster SR-800R - Blackbody

CI Systems SR-800R
8.3.2 Blackbody
Two types of Blackbodies are available: Differential and Absolute.
The Differential Blackbody components are:
 Head Cable: the SR-800R Controller-to-Blackbody cable.
 Inlet Pipe: a pipe connecting the Julabo Circulation System to the Blackbody.
 Outlet Pipe: a pipe connecting the Blackbody to the Julabo Circulation System.
 Dry Nitrogen Inlet: external Dry Nitrogen inlet connector (1 bar max).
 Dry Nitrogen Exhaust Slots: nipples, located around the Blackbody emitter. The
nipples are used to spread the Dry Nitrogen in order to prevent possible
condensation on the Blackbody emitter surface when reaching temperatures lower
then 5 ºC.
NOTE
The uniformity of the Blackbody could decrease when using
the Dry Nitrogen.
605-7040 Operation Manual
Rev D 8-4
June 2013
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com