CI Systems ControlMaster SR-800R - GPIB Connector Pinout

CI Systems SR-800R
2.4.6 GPIB Connector Pinout
Table 2-6 lists the GPIB Connector Pinout:
Table 2-6: GPIB Connector Pinout
Pin
#
Signal
Name
Function Max
Voltage
(V)
Max Current
(mA)
1 DIO1 Data IO1 TTL 2
2 DIO2 Data IO2 TTL 2
3 DIO3 Data IO3 TTL 2
4 DIO4 Data IO4 TTL 2
5 EOI End Of Identity TTL 2
6 DAV Data Valid TTL 2
7 NRFD Ready For Data TTL 2
8 NDAC Data Accept TTL 2
9 IFC Interface Clear TTL 2
10 SRQ Status Request TTL 2
11 ATN Attention TTL 2
12 SHIELD Connected to the shield ---- ----
13 DIO5 Data IO5 TTL 2
14 DIO6 Data IO6 TTL 2
15 DIO7 Data IO7 TTL 2
16 DIO8 Data IO8 TTL 2
17 GND Ground ---- ----
18 GND Ground ---- ----
19 GND Ground ---- ----
20 GND Ground ---- ----
21 GND Ground ---- ----
22 GND Ground ---- ----
23 GND Ground ---- ----
24 GND Ground ---- ----
605-7040 Operation Manual
Rev D 2-11
June 2013
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com