CI Systems ControlMaster SR-800R - Operation Instructions; Figure 8-10: Operation Instructions - Switching the Circulation System on

CI Systems SR-800R
8.4.5 Operation Instructions
1. Fill the Julabo Circulator with fluid, 30mm below the tank rim. Follow the
instructions in the Julabo Circulation System Operating Manual.
2. Switch the Julabo Circulation System ON (both switches).
3. Switch the SR-800R Controller ON (see Section 3.1).
Figure 8-10: Operation Instructions - Switching the Circulation System ON
Circulator
ON/OFF Power Switch
Julabo Controller
ON/OFF Power Switch
4. Wait 1 minute and refill fluid, if needed.
605-7040 Operation Manual
Rev D 8-15
June 2013
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com