CI Systems ControlMaster SR-800R - Mounting the Hood and Dry Nitrogen Connection; Figure 8-12: Mounting the Hood and Dry Nitrogen Connection

CI Systems SR-800R
8.6.2 Mounting the Hood and Dry Nitrogen Connection
(See Figure 8-12)
To mount the optional Hood on the Blackbody:
1. Unpack the Hood and the Blackbody.
2. if disconnected from the Blackbody: attach the Hood to the Blackbody and fasten
it using the four latches.
3. Connect the Dry Nitrogen Source (1 bar max) to the Hood Dry Nitrogen Inlet
(instead of connecting the Dry Nitrogen Source to the Blackbody Dry Nitrogen
Inlet).
Figure 8-12: Mounting the Hood and Dry Nitrogen Connection
Hood Blackbody
Latch (x4)
Dry Nitrogen Inlet
(1 bar max)
605-7040 Operation Manual
Rev D 8-20
June 2013
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com