CI Systems SR-800R
4.3.1 Unpacking
1. Verify that the number of packages in the delivery matches the number of
packages stated in the attached packing list.
2. Visually inspect all packages for traces of excessive moisture or external damage.
3. Carefully open each package, observing handling labels ("this side up", "open this
end", and the like).
4.3.2 Installation
The SR-800R can be installed in two configurations:
Portable Configuration (see Section 4.3.2.1)
19" Rack Mount Configuration (see Section 4.3.2.2)
4.3.2.1 Portable Configuration
This procedure provides step-by-step instructions on how to install the SR-800R to be
operated as a portable unit. To install:
1. Unpack the SR-800R.
2. Open the carrying handle, as shown in Figure 4-1.
3. Place the SR-800R on the Bench.
Figure 4-1: Portable Configuration
Opening Direction
Pull To
Open
Pull To
Open
605-7040 Operation Manual
Rev D 4-2
June 2013
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...