CI Systems SR-800R
4. Handling & Installation
This chapter explains how to transport, store, unpack, and install the SR-800R.
This chapter includes step-by-step instructions for the following tasks:
Transportation (Section 4.1)
Storage (Section 4.2)
Installation (Section 4.3)
4.1 Transportation
The SR-800R can be transported by land, sea, or air while packed in its original
packaging.
4.2 Storage
While packed in its original packaging, the SR-800R can be stored in the following
conditions:
Temperature range: -20°C to +70°C
Relative humidity: 5%-95% (non condensing)
4.3 Installation
CAUTION
Tighten all screws using hand-torque only. Failure to comply
may result in damage to equipment.
The SR-800R installation includes the following main stages:
Unpacking (see Section 4.3.1)
Installation (see Section 4.3.2)
605-7040 Operation Manual
Rev D 4-1
June 2013
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...